Browse 28 ProductsBH2 Hydraulic Dock Systems Options
Beacon® BH2 OPTION
Call for custom quote for your application
| BH2 OPTION | |||
| Model No. | Description | Price | |
| 1) BH2-3PH | 3 Phase Motor, 208 - 230 - 240 - 460 Vac | $1,038.21 | |
| 2) BH2-WS-10 | Weather Seal option includes brush weather seals on both sides and foam filled in rear for a 10’ long leveler. | $261.42 | |
| 3) BH2-HL18 | Lip 18" (14" Projection) 40 lbs. | $332.31 | |
| 4) BH2-HL20 | Lip 20" (16" Projection) 60 lbs. | $440.86 | |
| 5) BH2-535 | Emergency Stop Feature | $861.24 | |
| 6) BH2-393 | Foam Insulation | $2,051.13 | |
| 7) BH2-AS | Abrasive Surface for a 6’ leveler. | $327.88 | |
| 8) BH2-PAN-6 | Self-forming Pan with bottom (leveler welded in) for a 6’ leveler. 270 lbs. | $1,803.34 | |
| 9) BH2-PAN-8 | Self-forming Pan with bottom (leveler welded in) for a 8’ leveler. 350 lbs. | $1,827.70 | |
| 10) BH2-EZ-6 | EZ Pan (Self-forming, no bottom) assemble at job site on concrete slab - for a 6’ leveler. 220 lbs. | $1,154.22 | |
| 11) BH2-EZ-8 | EZ Pan (Self-forming, no bottom) assemble at job site on concrete slab - for a 8’ leveler. 260 lbs. | $1,178.59 | |
| 12) BH2-531 | Yellow and Black Diagonal Striping on Sides. | $262.92 | |
| 13) BH2-FRTG-6 | Full range toe guards for a 6' Leveler 60 lbs. | $396.56 | |
| 14) BH2-FRTG-8 | Full range toe guards for a 8' Leveler 65 lbs. | $440.86 | |
| 15) BH2-FRTG-10 | Full range toe guards for a 10' Leveler 70 lbs. | $485.17 | |
| 16) BH2-WO | Leveler without Standard Bumpers | $-39.85 | |
| BH2 FINISH OPTION | |||
| Model No. | Description | Details | Price |
| 17) BH2-P | BH2 Dock Leveler - Primer | Sherwin Williams Rust Inhibitive Primer. (Does not prevent Rusting, it inhibits it). | $986.98 |
| 18) BH2-PCF | BH2 Dock Leveler - Powder Coat Finish | Applied electrostatically and then cured under heat. Powder coated surface is more resistant against scratches, chipping, wear and fading compared to paint. Difficult to touch up. | $7,310.82 |
| 19) BH2-GAF | BH2 Dock Leveler - Hot Dip Galvanize Finish | (Note: Hot Dip Galvanizing the Leveler can cause Warping of the Dock Leveler or cause a Bubble to form in the Deck), the unit is upgraded from the standard ¼" to ⅜" top deck to help mitigate the bubble issue when the galvanize is ordered. | $8,307.75 |
| 20) BH2-EZ-P | EZ Pan - Primer | Sherwin Williams Rust Inhibitive Primer. (Does not prevent Rusting, it inhibits it). | $1,302.66 |
| 21) BH2-EZ-PCF | EZ Pan - Powder Coat Finish | Applied electrostatically and then cured under heat. Powder coated surface is more resistant against scratches, chipping, wear and fading compared to paint. Difficult to touch up. | $510.36 |
PROP 65 WARNING
For California Residents: www.P65Warnings.ca.gov
Products on this page may lead to cancer or reproductive harm.
