|
|
 |
| –>–> |
 |
|
|
|
|
|
|
Product: Lift and tilt table
Beacon Model: Beacon BZLTT series zero lift and tilt table.
Description: Beacon zero lift and tilt table is designed to lift items to an ergonomically proper position and then tilt them to lessen worker bending. Items can be loaded and unloaded from this ground lift and tilt table using a standard hand pallet truck. No pit mounting is required with the ground lift table.
Construction: Electric pinch point guards on front of platform protect personnel. Steel shrouds protect personnel from hazardous pinch points. Vinyl flap safety feature on entry side.
Operation: Fused, 24 V, Nema-4 hand control with four buttons.
Usage: It is the customer’s responsibility to verify correctness of fit for applications. It is the customer's responsibility to verify that this unit complies with all safety laws, codes and regulations.
Size: This ground lift and tilt table is available in the following platform sizes: 44" wide x 52" high, 52" wide x 52" high, 44" wide x 72" high and 52" wide x 72" high.
Service Range: The ground lift and tilt table has a lowered height of 1/2" and comes with raised heights of either 36" or 48".
Operating Range: Fourty Five degree maxium tilt.
Capacity: The ground lift and tilt table comes with capacities of 2,000 or 4,000 lbs.
Electrical: Industrial quality, 56 frame, 2 HP motor delivers best torque with minimal amperage draw and maximum life.
Powered: Upper travel limit switchs for lift and tilt featurs. Brass velocity fuses in cylinders prevent drop of table in case of hydraulic failure.
Options: A foot control with guard, warning beeper and electric toe guard on load/unload side is available as an option on the ground lift and tilt table.
Weight: The unit is available in a variety of weights ranging from 2,121 to 3,129 lbs.
Note: The raised height of the ground lift table is identified and noted when the platform of the tilt table is in the level position.
|
|
|
|
|
|
|
